Hard shell rooftop tents
Made in South Africa
Our hard shell rooftop tents are built for South African 4WD touring: aluminium shells on a B-Tech® Alloy frame, dual-layer blackout canvas, and automotive-grade seals that keep them dust free and watertight. Your bedding stays inside when you pack up, saving space in your vehicle.
Clamshell: up in about 30 seconds. The LX27 Gen 2 is our lightest (81kg, 175mm closed); the AX27 carries the most on its roof (200kg dynamic).
Double-action (pop-up style): both ends lift, for 1.28–1.44m of headroom from end to end, and they're up in about 60 seconds. The TX27 is 1.4m wide; the TX27 MAX is 1.6m wide, for two adults and a child.
Compare them in the table below, or see them at a dealer near you.
Why The Bush Company rooftop tent?
Explorer-Tested Features You’ll Love
Ready for anything, anywhere
A rooftop tent lets you set up camp wherever your 4WD can take you, from a remote beach to a quiet riverbed. Setup takes 30–60 seconds, so there's less time making camp and more time exploring.
Tough when it matters, comfortable where it counts
Your rooftop tent keeps you up off the ground, dry and comfortable, with a thick mattress, a dual-layer canvas body that works like double glazing to insulate and cut condensation on the inside walls, a blackout fabric that blocks light, and a large rainfly. Being up high also gives you the view and a breeze.
More space for big adventures
A reinforced hard shell roof lets you carry kayaks, boards, bikes or solar panels on top (roof ratings vary by model), and with your bedding stored inside the tent there's more room in your vehicle for everyone and everything else.
Features you'll love!
Product highlights
B-Tech® Alloy Extrusions
Our proprietary alloy blend for strength & durability.
Waterproof, UV-Resistant Canvas
Dual-layer canvas works like double glazing to cut condensation, and resists mould, mildew and UV.
Stainless Steel Hinges, Latches and Handles
Custom-made, heavy-duty stainless steel over-centre latches with holes for a padlock.
Make More Space for Adventure
Ezi-Slot channels let you mount awnings, solar panels, recovery tracks and more to the tent.
Versatile, Secure Storage
Roof and side pouches plus water bottle holders keep small gear off the mattress.
Easy to Pack Up & Go
Bedding stays inside, saving space in your vehicle, and rubber seals keep it dust free.
Not sure which one is right for you?
Compare Our Rooftop Tents
AX27 Clamshell
Our all-round clamshell: up in 30 seconds, 1.7m of headroom at the entry end, room for full bedding inside, built-in 12V and USB power, and a roof rated to 200kg dynamic when closed. 99kg.
LX27 Gen 2 Clamshell
The lightest and lowest profile tent in our range: 81kg and 175mm closed, with 1.6m of headroom and a 70mm mattress of memory foam on high-density foam. Up in 30 seconds, with standard bedding, sheets and sleeping bags stored inside.
TX27 Double-Action
Double-action, pop-up style roof with 1.28–1.44m of headroom from end to end, six doors and windows, and 190mm of bedding space when closed. Up in 60 seconds. 1.4m wide, 123kg.
Tech specs
AX27 Clamshell Rooftop Tent
View details
|
LX27 Gen 2 Lightweight Rooftop Tent
View details
|
TX27 Hardshell Rooftop Tent
View details
|
TX27 MAX Hardshell Rooftop Tent
View details
| |
| Price | R 61,045.00 | R 59,230.00 | R 79,940.00 | R 83,290.00 |
|---|---|---|---|---|
| Frame | Aluminium extruded frame with stainless steel fittings | Aluminium extruded frame with stainless steel fittings | Aluminium extruded frame with stainless steel fittings | Aluminium extruded frame with stainless steel fittings |
| Roof design | Clamshell | Clamshell | Double-action (pop-up style) | Double-action (pop-up style) |
| Canvas | Dual-layer 315gsm ±5% | Dual-layer 260gsm | Dual-layer 315gsm ±5% | Dual-layer 315gsm ±5% |
| Internal height | 1.7m at the entry end | 1.6m at the highest point | Front 1.44m, rear 1.28m | Front 1.44m, rear 1.28m |
| External dimensions | Length 2.25m, width 1.4m, height 280mm | Length 2.25m, width 1.39m, height 175mm; 195mm with foot rails | Length 2.25m, width 1.4m, height 348mm | Length 2.25m, width 1.6m, height 348mm |
| Weight (excl. ladder) | 99kg | 81kg | 123kg | 133kg |
| Mattress thickness | 80mm dual-density foam | 70mm: 30mm memory foam on 40mm high-density | 80mm dual-density foam | 80mm dual-density foam |
| Mattress dimensions | Length 2.13m, width 1.28m | Length 2.05m, width 1.27m | Length 2.13m, width 1.28m | Length 2.13m, width 1.45m |
Customise your rooftop tent
Awning To Tent Bracket 4 Piece - AX27, TX27/MAX, DX27
Awning To Tent Bracket 4 Piece - LX27
Classic Awning To Tent Bracket
Spring Rod Adapter
AX27 Tent Large Rainfly Set
Outhouse Shower Tent
Accessory To Tent Bracket Set - Outhouse
Low Profile L Bracket
Mounting your rooftop tent

FAQs
Can I leave my bedding inside the tent?
Yes. On every tent, standard bedding, sheets and sleeping bags can stay stored right inside the closed tent. The TX27 and TX27 MAX have 190mm above the mattress and the AX27 more than 120mm, so there's room for pillows and duvets too. The LX27 Gen 2 has 70mm. That saves space in your vehicle and keeps your bedding clean and dust free.
Clamshell or double-action: which should I choose?
A clamshell (LX27 Gen 2, AX27) hinges at one end, so it's lighter and lower and up in about 30 seconds, with the most headroom at the entry end. A double-action tent (TX27, TX27 MAX) lifts at both ends, pop-up style, for near-full headroom from end to end, and is up in about 60 seconds.
Can my vehicle carry a rooftop tent?
In most cases, yes. Thousands of customers have fitted our tents to a variety of vehicles, vans and camper trailers. Our tents weigh 81–133kg without the ladder. As with any roof-mounted gear, add up the tent, your rack or canopy and anything on top, and confirm the total is within your vehicle's and rack's dynamic roof load ratings (the rating while driving, which is lower than the static rating when parked). Check the overall height too. If you're unsure, ask our team or a dealer.
How do I mount a rooftop tent?
Every tent comes with fitment brackets: the LX27 Gen 2 has six brackets that mount to the side of its foot rails for securing to load bars, and the AX27, TX27 and TX27 MAX come with the Rooftop Tent Universal Fitment Set. We also have mounting options for alloy canopies, low-profile setups and cab clearance. Tents can be fitted with the open end at the rear of the vehicle, or in reverse with the open end facing forward and the ladder secured to a roof rack on the cab; a reversed tent needs a dead bolt bracket for extra protection against it opening while you drive. The Bush Company or one of our dealers can fit it for you; if you're fitting it yourself, follow the instructions on the product page.
Are the rooftop tents waterproof?
Yes. The body is dual-layer acrylic-treated polyester ripstop canvas, and automotive-grade rubber seals keep the closed tent dust free and watertight. A wrap-around rainfly covers the front and sides of the tent (the TX27 and TX27 MAX also have a smaller rainfly over the rear window). It covers the ladder and entryway so you can get in and out dry, stops water pooling against the doorways, and lets you keep a window or vent open in the rain.
Before your first trip, open the tent and wet the canvas down so the stitching thread swells and seals the stitch holes. Condensation can still form inside on cold nights, as in any tent: keep a window or vent open for airflow, and let the tent dry out fully after each trip. The two canvas layers work like double glazing: the air gap between them insulates the inner layer, which significantly reduces condensation on the inside walls. The marine carpet underlay under each mattress is designed to help reduce condensation beneath it.
Where are the tents made, and where can I see one?
All our rooftop tents are made in South Africa for The Bush Company. You can see them at one of our dealers. You can also watch the product videos for the AX27, the LX27 Gen 2 and the TX27 and TX27 MAX.
Can I lock the tent?
Yes. The custom-made, heavy-duty stainless steel over-centre latches on all our rooftop tents have holes for a padlock, so you can lock the tent closed.
Can you mount a rooftop tent on roof racks?
Yes: on roof racks, load bars or a canopy that can take the weight. Check your rack's dynamic load rating first, or ask our team or a dealer.
Didn’t find your answer?
Don’t hesitate to contact us



